Haicom HI-505SD SD Bluetooth GPS
Simply plug HI-505SD into any devices equipped with the standard SD slot, user can instantly enjoy the state of the art wireless GPS navigation. The basic concept of the HI-505SD is that the Bluetooth®/GPS section only taking power from the host device (like PDA, UMPC, tabletPC, laptopPC, etc.) via the miniSD™ to SD adaptor. In the meantime, users can still using the miniSD™ memory card without worry about the SD slot was occupied.
HI-505SD advantages:
- Simply plug in the HI-505SD into any SD slot from the standard mobile device with Bluetooth® features, the device become the all-in-one GPS navigator. HI-505SD provides the flexibility for GPS enable in different devices and different occasion usages.
- Unlike other SD GPS receivers occupied the SD slot, HI-505SD allow user to use any memory size miniSD™ card while using the HI-505SD simultaneously.
- Unlike most SD GPS receivers with fixed build-in memory, HI-505SD provide the flexibility for using any separate memory size miniSD™ card depend on how big the memory size needed.
- Unlike regular SDIO GPS receiver require complicated software and driver installation, user can easily use HI-505SD and enjoy the GPS navigation simply set up the standard Bluetooth® connection between the devices.
- As soon as plug in HI-505SD, user can start using the wireless GPS navigation without worry about the Bluetooth® GPS receiver battery life.
- Equipped with the 20 channel ultra high sensitive SiRF StarIII GPS module, HI-505SD can get 3D fixed in any outdoor locations and without using the external antenna.
- Unlike normal Bluetooth® GPS receiver moving around dashboard while driving, HI-505SD fixed on the mobile device and not to worry about where to place the unit.
- HI-505SD module concept allow HI-505SD become a wired GPS receiver. By connecting with different optional cables via the adapting box, HI-505SD can also be used as a regular GPS mouse. HI-505SD can not only be wireless Bluetooth GPS receiver and also be the wired GPS receivers, like, USB GPS receiver, RS232 GPS receiver, PDA GPS receiver, etc.
Accessories: Standard Accessories:
| |
Model Name |
model # |
| 1. |
HI-505SD Bluetooth® GPS receiver unit |
HI-505SD |
| 2. |
Tool CD |
CDR-01 |
| 3. |
User Manual |
MAU-505 |
|
HI-505SD as a regular GPS mouse:
By connection different optional connecting cables, HI-505SD can be all kinds of independent wired GPS receiver solutions. |
HI-505SD Bluetooth® GPS receiver can be used within a vehicle via the cigarette lighter outlet by purchasing the optional adapter cables.
|
LED Indicator (Red) |
LED Indicator (Blue) |
| LED off |
Receiver switch off |
| LED flashing |
GPS Position Fixed |
| LED stay on |
GPS Signal searching |
|
| LED off |
Bluetooth® switch off |
| LED flashing |
Bluetooth® searching |
| LED stay on |
Bluetooth® connected | |
GPS Receiver
Specification |
 |
 Chipset |
SiRF Star III |
|
| Interfaces |
Bluetooth® & Mini-1394 |
|
Protocol
|
NMEA0183 GGA, GSA, GSV, RMC, GLL |
|
| Baud Rate |
4800, N, 8, 1 |
|
Max. Update Rate
|
1 Hz |
|
Datum
|
WGS84 |
|
Channel
|
20 channel |
|
Frequency
|
L1, 1575.42MHz |
|
Hot Start
|
8 sec. Average |
|
Warm Start
|
38 sec. Average |
|
Cold Start
|
48 sec. Average |
|
Reacquisition Tike
|
100 ms |
|
Position Accuracy
|
15m 2D RMS, SA off |
|
Macimum Altitude
|
18,000m |
|
Maximum velocity
|
515m/s |
|
Voltage
|
DC 3.3V+-10% |
|
Power consumption
|
90mA continuous mode |
|
Antenna Type
|
Built-in active antenna |
|
External Antenna Connector
|
MMCX (Optional) |
|
Dimension
|
Fold: 46 (L) x 43 (W) x 20 (H)mm
Unfold: 80 (L) x 43 (W) x 18 (H)mm |
|
LED Indicator:
|
3D Positioning (blinking) or
Searching GPS (on) |
|
